Sentrysafe SPD 5.5.5 Manual de usuario descargar pdf (Pagina 33)

Sample Sequencer

Operation

Sample Nametag

Figure 10 shows the sample nametag which may be removed from the rear of the display

assembly by removing the front display bezel and four screws. The bezel may be snapped off by

lightly prying with a flat screw driver on one of the corners. The nametag slips into the pocket on

rear of the display. One may type the desired sample names slightly above the respective lines

and insert the nametag back into the display. Sample number one is on the top line. Two

nametags are shipped with each Sample Sequencer.

FIGURE 10 - Sample Nametag

SENTRY Equipment Corp • P. O. Box 127 • Oconomowoc, WI 53066 • 262/567-7256 • FAX: 262/567-4523

Web: www.sentry-equip.com • e-mail: [email protected]

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Sin comentarios

Sentrysafe SPD 5.5.5 Manual de usuario Pagina 33